Micro-Blaster™ IIIx3 Kit

$2,058.75

Contains 3 heads and can trigger 1, 2, or all 3 simultaneously.

SKU: MBIIX3-KIT Category:

 

MBIIX3-KIT™

The Micro-Blaster™ IIx3 is the largest, most powerful Micro-Blaster™ system that we offer. The kit consists of three Micro-Blaster™ II heads attached by 25-foot hose assemblies to a 3-way manifold system with a locking safety valve allowing the user to simultaneously fire one, two, or three heads at the same time. Like the Micro-Blaster™ II, the system is intrinsically safe and cannot be initiated until the user pressurizes the system. It also has the added feature of a safety lock on the manifold, which is only unlocked for use when the area has been cleared of people and the system is ready to initiate.

The Micro-Blaster™ IIx3 allows users to break much larger masses of rock or concrete than with just the single head models. Users will need to supply a source of compressed air or CO₂ (minimum 75 psi, 7-gallon portable air tank recommended) to initiate the system. Note that you will need to outfit your air source with a quick coupler (¼ inch Industrial Interchange) to connect the hose on the MBIIx3 Manifold to your air source. We offer an Air Tank Conversion Kit (MBIIX3-ATCK) in our accessories for those who already have air tanks that may not be fully compatible. For work in remote areas, where larger air sources aren’t practical, we offer a ½-gallon portable air tank that can be used in conjunction with a T-Handle bicycle pump for initiation of the system. See the Micro-Blaster™ Portable Air Tank (MBII-ARTK) in our accessories section for more information about this.

Included with the Micro-Blaster™ IIx3 Kit:

  • 3 Micro-Blaster™ II Heads with three 25-foot attached Hoses with Quick Couple Ends
  • Hole Blower Tool
  • Wire Brush for cleaning holes
  • MBIIx3 Service Wrench
  • MBIIx3 Firing Pin Ejector Tool
  • 2 Bull Pins
  • 3-Way Manifold Assembly with Lock and Key
  • Safety Glasses
  • Magnetic Cartridge Retrieval Tool
  • Quick Card Instructions
  • Manual

Use your own air tank with the Micro-Blaster™ II system. Read more about this on our Tips-n-Tricks page.

Download the Manual here.

Be confident in your purchase with our Product Warranty.
 

Number of Heads

3

Hole Diameter

5/16 inch

Hole Length

10 inches

Outside Case Size

16.5" W x 15" D x 6.5" H

Weight

18 pounds

Pull Cord Length

n/a

Uses Air Pressure

yes, includes 3 25-foot hoses for each head