MB-BWGN
The Micro-Blaster™ II Blow Gun is an optional accessory used for cleaning the dust and debris out of your drilled holes faster than with the included hole blower. The most tedious aspect of using your Micro-Blaster™ system, besides hole drilling, is the hole cleaning process. We developed the Micro-Blaster™ Blow Gun to help speed up this cleaning process. The tool will quickly and thoroughly clear the dust from the drilled holes in just a couple of seconds. Since its use is intermittent, only a small air compressor, capable of 100 psi output is required for operation. It consists of a 5-foot air hose. One end has a lever valve with a 9.5-inch-long blower tube, and the other end has a ¼-inch quick connect industrial interchange plug that is the same as our Manifold connector.
!!! SAFETY NOTICE !!!
This blow gun assembly is not OSHA compliant as it does not limit pressure at the nozzle to 30 psi. Care should be used not to direct output at personnel. Always wear approved eye protection when using this and other Ezebreak products.
Always work safely and crack wisely!.
